RIBBON MOTION ERROR FAULT OVERRIDE PROCEDURE

Applies to : T6045/ T6180 

 

  1. TURN ON PRINTER
  2. PUT PRINTER IN OFFLINE MODE
  3. PRESS AND HOLD, "ENTER" AND "LINEFEED" BUTTONS UNTIL PANEL BEEPS,

    4. "TECH ACCESS ON" WILL BE TEMPORARILY DISPLAYED.

  4. PRESS AND HOLD, "ENTER" AND " FORM FEED" BUTTONS UNTIL PANEL BEEPS, "FLT OVERRIDE ON" WILL BE DISPLAYED TEMPORARILY.
  5. PRESS "MODE" BUTTON. DISPLAY WILL SHOW "OFFLINE NORMAL".
  6. PRESS "UP" ARROW OR "DOWN" ARROW BUTTON UNTIL "TEST" IS DISPLAYED.
  7. PRESS "FORMS" BUTTON. DISPLAY WILL SHOW "TEST PATTERN".
  8. PRESS "UP" OR "DOWN" ARROWS UNTIL DISPLAY SHOWS "TEST FLTOVRD".
  9. PRESS "CPI" BUTTON. DISPLAY WILL SHOW "FLTOVRD PAP MOT".
  10. PRESS "UP" OR "DOWN" ARROWS UNTIL DISPLAY SHOWS "FLTOVRD RIB MOT" .
  11. PRESS "LPI" BUTTON. DISPLAY WILL SHOW "RIB MOT Off* ".
  12. PRESS "UP" OR "DOWN" ARROW. DISPLAY WILL SHOW "RIB MOT ON".
  13. PRESS "ENTER" BUTTON. DISPLAY WILL SHOW "RIB MOT ON* ".
  14. TURN PRINTER "OFF" AND THEN BACK "ON".
  15. PRINTER IS NOW READY FOR NORMAL OPERATION.