PAPER MOTION SENSOR ADJUSTMENT

Applies to MT645 - MT661 - MT691

1. GET PRINTER "OFFLINE"
2. PRESS "ENTER" AND "LINE FEED" AND HOLD BOTH – THE DISPLAY WILL QUICKLY FLASH "TECH ACCESS ON"
3. PRESS "MODE" ONE TIME, WILL DISPLAY "NORMAL"
4. PRESS UP OR DOWN ARROW TO "TEST"
5. PRESS "FORMS 1" BUTTON, WILL DISPLAY "TEST PATTERN"
6. PRESS UP OR DOWN ARROW TO "TEST DIAG"
7. PRESS "CPI 2" BUTTON TILL "DIAG PAPER CAL" IS DISPLAYED
8. PRESS "LPI 3" BUTTON TILL "PAPER CAL/PAPER OUT" IS DISPLAYED
9. PRESS UP OR DOWN TILL "PAPER CAL/PAPER MOTION" IS DISPLAYED
10. PRESS "ENTER" BUTTON – EACH TIME IT IS DEPRESSED, IT WILL

QUICKLY MOVE PAPER AND DISPLAY A NUMERIC VALUE – PRESS "ENTER" BUTTON A FEW TIMES, THE FIRST COUPLE OF DEPRESSIONS THIS NUMBER WILL CHANGE SLIGHTLY, WHEN THIS NUMBER SEEMS TO STABILIZE, YOU ARE DONE. POWER DOWN THE PRINTER, THE NEW SETTING IS NOW STORED.