Support Archives 

P-series, XQ Series, 6000 Series 1. P-Series shuttle motor start troubleshooting. 2. P-600 circuit breaker tripping trouble shooting. 3. Installation instructions for the CHA100 bushing (replacement for the P300 linear bearing on the shuttle shaft) 4. Instructions for using the CHA116 yoke removal tool (pdf) 5. XQ series ribbon motor replacement procedure (pdf) 6. Configuration procedure for Logic C including 6000 series control panel flowchart (pdf) 7. Configuration notes for P-series Serial (RS-232) pcba 106561-901 (new style) 8. Replacement of the power supply regulator pcba due to blown +30V.

MVP, 3040, 4280 1. MVP ribbon motor replacement procedure (pdf) 2. 3040 left hand ribbon motor replacement procedure (pdf) 3. 3040 right hand ribbon motor replacement procedure (pdf) 4. 4280 and DEC LG06 hammer fret replacement procedure (pdf) 5. 4280 missing one or more DC voltages and power supply has been eliminated. 6. MVP printer with IGP installed, barcodes not printing correctly. (wrong height)

9000 Series 1. Installation instructions for the 9012 ribbon motor (pdf)

Proline (5000) Series 1. Proline / 5000 series hammer fret replacement procedure (pdf) 2. Paper creeping with OEM versions of 5000 (Proline) printers 3. 5000 / Proline series flash rom download procedure and configuration notes (pdf) 4. Clarify compatibility between shuttle assemblies used in the 5005 printers 5. Clarify speed ratings on different versions of 5005 printers (475 vs 500 lpm)