| 100-2tp.doc |
Double or Extra Characters Printed Intermittently |
| 100-3tp.doc |
Guidelines for installation of additional memory in
K31/K31D/K40D RIGS printers. |
| 200-1tp.doc |
Replacing the 3 1/2" floppy drive in a dual floppy
Kentek printer. |
| 200-2tp.doc |
Matching line voltage to the Power Supply |
| 300-1tp.doc |
Paper Jamming in the Timing Roller area or Registration
problems |
| 300-2tp.doc |
Timing Roller Shock Caused By the Paper Drive Belt Idler
Assembly Binding |
| 300-3tp.doc |
Paper Jams & 023 Errors on K40D with HCO |
| 300-4tp.doc |
"Image wrap" on Kentek printers caused by improper
grounding of upper paper guide assembly |
| 300-5tp.doc |
Removal of Jammed Cassette or HCI |
| 300-6tp.doc |
Exit Drive Gear Damage |
| 400-1tp.doc |
Replacement guidelines for Kentek duplex printer top cover
gas springs |
| 400-2tp.doc |
Print Quality Problem, Page Partially Printed |
| 400-3tp.doc |
Hard Disk Drive Replacement-K30/K30D |
| 500-1tp.doc |
Interpreting Ethernet Board LED’s |
| 500-2tp.doc |
Installing 1.09.02 (or higher) Ethernet Software on dual
Floppy Drive Printers |
| 600-1tp.doc |
Printer Lock Up After Off Line Printing |
| 600-2tp.doc |
TPS Sensor Test |
| 600-3tp.doc |
RIGS Board Diagnostic Test returns false error #714 |
| 600-4tp.doc |
Quantum 1280 MB "Fireball" Hard Drive |
| 700-1tp.doc |
K40D PSS Sensor Open Errors |
| 700-2tp.doc |
Detoning |
| 700-3tp.doc |
Machine Check 40 caused by a loose or defective Transfer
Corona |
| 700-4tp.doc |
Machine Check Error 381/382 and other random errors caused by
a loose or defective Transfer Corona |
| 700-5tp.doc |
Ozone filters used in Kentek printers. |
| 700-6tp.doc |
Photoconductor fatigue |
| 700-7tp.doc |
Streaking on the left hand side of the page due to Cleaner
Unit Clogging |
| 700-8tp.doc |
Main Charge Corona Cleaning Procedure To Remove Corona
Streaks |
| 700-9tp.doc |
Main Charge Corona Replacement To Remove Corona Streaks |
| 800-1tp.doc |
K40D Error Codes 270 to 281 |
| 800-2tp.doc |
121 Error Codes Caused by Write Protection on the Kentek PCL5
font Diskette |
| 800-3tp.doc |
Photoconductor Packaging Tape Causing Print Problems |
| 800-4tp.doc |
Machine Check 399 caused by incorrect Parallel interface
configuration. |
| 800-5tp.doc |
False "Upper Cassette Unplugged" message on K31/K40
printer. |
| 800-6tp.doc |
Configuring the K31/K31D printer for MICR printing |
| 800-7tp.doc |
Machine Check 381 caused by attempting to set registration on
a K40D printer without the duplex holding tray installed |
| 900-2tp.doc |
Back-Up & Restore Functionality |
| 900-3tp.doc |
Upgrading K3 K4 IGS with HPIID Emulation |
| 900-4tp.doc |
Upgrading a K31 or K40D printer to Version 2000 or newer
software |
| 900-5tp.doc |
Upgrading an HP C40D printer to Version 1620 or newer
software |
| 900-6tp.doc |
Installing the POSTNET PCL5 Font on K31/K40 Printers with
version 2.03.2 or earlier software. |
| 1000-1tp.doc |
Postscript Memory Usage |
| 1000-2tp.doc |
Using Adobe PCSEND Command to Download PS Fonts |
| 1000-3tp.doc |
Changing Tray Linking in Postscript |
| 1000-4tp.doc |
PostScript errors or large print jobs fail to print to
completion when printing from Microsoft Windows |
| 1000-5tp.doc |
Unable to Run Postscript with 1.2/2.1 GB HDD’s |
| 1100-1tp.doc |
Error Code 306, incorrect K40 printhead ARIF board DIP switch
settings |
| 1200-1tp.doc |
HCO Controller Board DIP switch settings |
| 1200-2tp.doc |
Job Offset Errors / 083 Errors with K30/40 HCO |
| 1200-3tp.doc |
HCO Part Number Correction -- Stacker Arm Assembly |
| 1200-4tp.doc |
1400 High Capacity Output Bench Testing |
| 1300-1tp.doc |
Removal of HCI from Printer |
| 1300-2tp.doc |
False 021 Errors on printer with HCI installed |
| 1300-3tp.doc |
High Capacity Input Bench Testing |
| 1400-1tp.doc |
Using the PJL MEDIASOURCE command on a K31/K40 printer with
4si emulation software. |
| 1500-1tp.doc |
K31, K31D & K40D Quick Maintenance |
| 1500-2tp.doc |
K40D Field Service Manual Part Number Correction |
| 1500-3tp.doc |
K40/K31 Diagnostic Specific Error Codes |
| 1500-4tp.doc |
K30, K31 and K40 ground points. |
| 1500-5tp.doc |
Lubricants for use in the K40 printer |
| 1500-6tp.doc |
K31 / K31D Job Offset Assembly Support |
| 1500-7tp.doc |
Part Number Correction - Actuator C Assembly / HCI |
| 1500-8tp.doc |
Connector designations for K31 / K40 TAGs |
| 1500-9tp.doc |
Part Number Correction-Idler/Gear Assembly-K40 |
| 1500-10t.doc |
Part Number Addition for White Grease |
| 1500-11t.doc |
Part Number Correction-Upper Paper Guide Assembly |
| 1500-12t.doc |
Part Number Correction-Blower Vacuum Transport |
